Connecting Easily To A Smartphone/Tablet (Nfc) - Panasonic Lumix DMC-FT5 Basic Operating Instructions Manual

Connecting easily to a smartphone/tablet (NFC)

Using the NFC "Near Field Communication" function, you can easily transfer data
necessary for a Wi-Fi connection between this camera and the smartphone/tablet.
∫ Compatible models
This function can be used with the NFC compatible device with Android (OS version
2.3.3 or higher). (excluding some models)
Preparation:
(On the camera)
•
Set [NFC Operation] to [ON].
(On your smartphone/tablet)
•
Check that your smartphone/tablet is a compatible model.
•
Turn on the Wi-Fi function.
•
Install the "Image App" in advance. (P27)
∫ Controlling this camera remotely with a smartphone/tablet by using
the NFC function
You can use the following functions by controlling this camera remotely with your
smartphone/tablet.
–
Remote recording (P32)
–
Playing back the pictures in the camera (P32)
–
Saving the pictures in the camera to the smartphone/tablet, or sending them to WEB services (P32)
1
Launch "Image App" on your smartphone/tablet.
2
Touch the smartphone/tablet to [
•
This function can be used even while the camera is turned off.
3
When the connection confirmation screen is displayed,
press 2/1 to select [Yes], and then press [MENU/SET].
4
Touch the smartphone/tablet to [
again.
•
When the smartphone/tablet has connected, an image of
this camera will be displayed on the smartphone/tablet.
•
The connected smartphone/tablet is registered to this
camera. A connection can be established with the
operation of steps
Note
•
You can register up to 20 smartphones/tablets. When the number exceeds 20, registrations
will be deleted, starting from the oldest touched one.
•
Performing [Reset Wi-Fi Settings] will delete the smartphone/tablet registration.
28
VQT4U09 (ENG)
1 2
and from the second time onwards.
] of the camera.
] of the camera