New Channel Message; Signal Condition; Selectable Satellites - Panasonic TX-L32EF62 User Manual

channels or change channel names and positions automatically.
The channel list is updated while keeping your settings in
●
Channel List, Child
Depending on the signal condition, the update may not work properly.
●
To update DVB-S channels, set Satellite,
●
before updating.
1) Select Satellite
to access
2) Set each item with
3) After settings, select

New Channel Message

Selects whether to give a notification message when a new DVB channel is
found or not.
When a notification message appears, you can perform
●
List pressing OK.

Signal Condition

Selects a channel and checks the signal condition.
A good Signal Strength is not an indication of suitable signal for DVB
reception.
Use the Signal Quality indicator as follows.
●
– Green bar: Good
– Yellow bar: Poor
– Red bar: Bad (Check the terrestrial aerial, cable or satellite dish)
Vertical lines show the maximum signal value of the selected channel.
●
To change the channel
●
For DVB mode
●

Selectable satellites

■
Selectable satellites and dish alignment to tune DVB-S
channels
To ensure your satellite dish is correctly installed, please consult your local
dealer.
Also please consult the received satellite broadcasting companies for details.
Lock, etc.
/ Search Mode / Scan Mode
/ and press
Start scan with
- 49 -
Favourites
Search Mode and Scan Mode
with / and press
OK to store
/ and press OK
Update Channel
Edit,
OK
to search