Table of Contents
Advertisement
– If you set to
AB.
– If you set to
2) Set
Satellite
for the selected LNB
– Select
No Satellite
(available satellite will be searched in Auto Setup).
– Select
User defined
– If you set to
Band,
User Band Frequency
Cable router you use). For details, read the manual of the Single
Cable router.
Watching
5. Press
BACK/RETURN
6. Select
Auto Setup
7. Select
Satellite
/
access
8. Set with
/
and press
Scan Mode
●
Full:
Scans the whole frequency range.
Quick:
Scans the suitable frequency for the selected satellite.
After settings, select
●
9. The confirmation screen is displayed and press
(Settings are made automatically)
When the operation is completed, the channel at the lowest position will
●
be displayed.
■
DVB-C, DVB-T, Analogue channels
1. Select
Auto Setup
2. Set
DVB-C Auto Setup Settings
(DVB-C)
Scan Mode
●
Full:
Scans the whole frequency range.
Quick:
Scans the suitable frequency in your country.
MiniDiSEqC
or
Single
DiSEqC
1.0, select from LNB AA, AB, BA and BB.
if you do not know the connected satellite
to set
Test Transponder Frequency
Single
Cable, additional settings are required. Set
and
Tuning and editing channels
to store
with
/
and press
Search Mode
/
Scan Mode
OK
to store
Start scan
with
with
/
and press
with
- 46 -
Cable, select from LNB AA and
PIN
(depending on the Single
Selectable satellites
OK
to access
with
/
and press
/
and press
OK
OK
to start
Auto Setup
OK
to access
/
/
/
and press
manually.
User
OK
to
to search.
OK
to store
- Quick Links:
- Table of Contents
- Information
- Basic Connection
Hide quick links:
Advertisement
Table of Contents
