Part Iii Menu; Outline Of The Procedure - Panasonic SX-KC211 Owner's Manual

Part III Menu

Various settings that enhance the functions of this instrument are accessed through the MENU function.

Outline of the procedure

1.
Press the MENU button.
0 1
MENU
+ 4
RHYTHM
CANCEL
— 7
SOUND
2.
Use the number buttons to enter the menu number of
the setting you wish to display (two digits).
The + and – buttons and the TRANSPOSE/ PRO-
GRAM buttons can also be used to select the menu
number.
MENU list:
[ ] indicates the name shown on the display.
01: PART VOLUME [PT VOL]
Volume settings for each part.
02: PART SOUND [PT SOUND]
Sound settings for each part.
03: PART PANPOT [PT PAN]
Stereo setting for each part.
04: PART MIDI CHANNEL [PT MIDI]
MIDI channel settings for each part
05: PART LOCAL SETTING [PT LOCAL]
MIDI LOCAL CONTROL settings for each part.
06: MIDI CLOCK [MIDI CLK]
MIDI CLOCK mode settings.
07: MIDI REALTIME COMMAND [MIDI RTC]
Setting to enable or disable the transmission/re-
ception of MIDI REALTIME COMMAND data.
08: MASTER TUNING [TUNING]
Fine adjustment of the tuning for the whole in-
strument.
09: SPLIT POINT [SPLIT]
Change the split point on the keyboard.
10: FOOT SWITCH ASSIGN [FOOT SW]
Assign a function to the Foot Switch (sold sepa-
rately).
11: LCD CONTRAST [CONTRAST]
Adjust the readability of the display.
28
QQTG0598
12: DEMO LED [DEMO LED]
ON/OFF settings for the LED lighting of the pad
2 3
buttons during a SONG or DEMO performance.
13: ALL INITIAL [ALL INIT]
Reset this instrument to the original settings.
5 6
3.
Press the EXECUTE button.
The display changes to the setting display for the
selected MENU.
8 9
4.
Use the TEMPO/PROGRAM buttons, the TRANS-
POSE/PROGRAM buttons, or the EXECUTE button to
adjust the settings in the selected menu.
TEMPO
PROGRAM
5.
When you have finished making the settings, press
the MENU button again.
If you execute a setting, there is also a menu to exit
the setting mode.
0 1
TRANSPOSE
+ 4
PROGRAM
CANCEL
— 7
EXECUTE
2 3
5 6
8 9