Part V Menu; Outline Of The Procedure - Panasonic SX-KC611 Owner's Manual

Part V Menu

Various settings that enhance the functions of this instrument are accessed through the MENU function.

Outline of the procedure

1.
Press the MENU button.
0 1
MENU
+ 4
RHYTHM
VARIATION
CANCEL
— 7
SOUND
2.
Use the number buttons to enter the menu number of
the setting you wish to display (two digits).
The + and – buttons and the TRANSPOSE/ PRO-
GRAM buttons can also be used to select the menu
number.
MENU list:
[ ] indicates the name shown on the display.
01: XBS [XBS]
ON/OFF setting for the EXTRA BASS SYSTEM
(emphasizes low-range sound).
02: PART VOLUME [PT VOL]
Volume settings for each part.
03: PART SOUND [PT SOUND]
Sound settings for each part.
04: PART PANPOT [PT PAN]
Stereo setting for each part.
05: PART REVERB SEND [PT REV]
Depth settings for the REVERB for each part.
06: PART CHORUS SEND [PT CHORS]
Depth settings for the CHORUS of each part.
07: PART MIDI CHANNEL [PT MIDI]
MIDI channel settings for each part
08: PART LOCAL SETTING [PT LOCAL]
MIDI LOCAL CONTROL settings for each part.
09: SONG TRACK MUTE [TR MUTE]
Mute setting for each track of a SONG.
10: SONG ALL CLEAR [SONG CLR]
Clear all SONG tracks.
11: SONG TRACK CLEAR [TR CLEAR]
Clear specified SONG tracks.
12: MIDI CLOCK [MIDI CLK]
MIDI CLOCK mode settings.
13: MIDI REALTIME COMMAND [MIDI RTC]
Setting to enable or disable the transmission/re-
ception of MIDI REALTIME COMMAND data.
14: SPLIT POINT [SPLIT]
Change the split point on the keyboard.
15: MASTER TUNING [TUNING]
Fine adjustment of the tuning for the whole in-
strument.
16: FOOT SWITCH ASSIGN [FOOT SW]
2 3
17: LCD CONTRAST [CONTRAST]
18: DEMO LED [DEMO LED]
5 6
19: ALL INITIAL [ALL INIT]
8 9
3.
Press the EXECUTE button.
The display changes to the setting display for the
selected MENU.
4.
Use the TEMPO/PROGRAM buttons, the TRANS-
POSE/PROGRAM buttons, or the EXECUTE button to
adjust the settings in the selected menu.
TEMPO
PROGRAM
5.
When you have finished making the settings, press
the MENU button again.
If you execute a setting, there is also a menu to exit
the setting mode.
Assign a function to the Foot Switch (sold sepa-
rately).
Adjust the readability of the display.
ON/OFF settings for the LED lighting of the pad
buttons during a DEMO performance.
Reset this instrument to the original settings.
0
TRANSPOSE
+
PROGRAM
CANCEL
—
EXECUTE
1 2 3
4 5 6
7 8 9
41
QQTG0588