Connections; Connection To A Tv - Panasonic SC-HTB10 Operating Instructions Manual

Connections

Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC mains lead until all other connections are complete.
Compatible with FULL HD 3D TV and Blu-ray Player
≥ This unit can pass through the 3D signal from a 3D compatible Blu-ray Player to a FULL HD 3D TV.

Connection to a TV

∫ HDMI
The HDMI connection supports VIERA Link
"HDAVI Control" (
compatible Panasonic TV.
≥ Use High Speed HDMI Cables that have the HDMI
logo (as shown on the cover). It is recommended
that you use Panasonic's HDMI cable.
Recommended part number:
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m),
RP-CDHS50 (5.0 m), etc.
≥ Non-HDMI-compliant cables cannot be utilised.
Basic connection (with an
ARC compatible TV)
ARC (Audio Return Channel)
(Available only when using an ARC
compatible TV)
With this function it is possible to receive the
digital audio signal from the TV without
connecting any other audio cable.
≥ Refer to the operating instructions of the TV
for the settings to output digital audio.
TV
A HDMI cable (not supplied)
§ Be sure to connect to the TV's ARC compatible
terminal. (Refer to the operating instructions for the TV.)
≥ If the connected TV is ARC compatible, but audio is
not output to this unit, connect using the optical
digital audio cable. (
10
an optical digital audio cable compatible TV)")
14) when used with a

AV IN
(ARC)
HDMI AV OUT (ARC)
right, "Basic connection (with
∫ OPTICAL IN
Connect the optical digital audio cable if the TV
is not ARC compatible (
Basic connection
(with an optical digital
audio cable compatible
TV)
TV
A HDMI cable (not supplied)
B Optical digital audio cable (not supplied)
≥ When connected to an ARC compatible TV, set
"TV Audio" to "ARC Off" to output the audio signal
from the optical digital audio cable. (
Audio")
below).
OPTICAL
OUT
AV IN
HDMI AV OUT
OPTICAL DIGITAL
AUDIO IN
17, "TV