Setting The Clock; Play Timer; Sleep Timer - Panasonic SC-HC40DB Operating Instructions Manual

Compact stereo system
Table of Contents

Advertisement

Setting the clock

This is a 24-hour clock.
 Press [CLOCK/TIMER] to select "CLOCK".
 Within 5 seconds, press [e,r] to set the time. (Press and
hold to change the time faster.)
 Press [OK].
To display the clock, press [CLOCK/TIMER].
Reset the clock regularly to maintain accuracy.

Play timer

You can set the timer to come on at a certain time to wake you
up.
This unit offers 3 optional play timers.
Preparation:
Turn the unit on and set the clock (➡ above).
Prepare the music source (disc, radio, iPod/iPhone,
Bluetooth, USB or AUX) and set the volume.
 Press [CLOCK/TIMER] repeatedly to select play timer.
 Within 5 seconds, press [e,r] to set the starting time.
 Press [OK].
 To set the finishing time, repeat step  and .
To activate the timer
 Press [z, PLAY] repeatedly to turn the selected play
timer on.
 Press [^] to turn the unit off.
Change the
Repeat step  to  (➡ above).
settings
Change the
 Press [z, PLAY] twice to clear zPLAY
source or
indicator from the display.
volume
 Make changes to the source or volume.
 Perform step  and  (➡ above).
Press [CLOCK/TIMER] repeatedly to
Check the
settings (When
select "zPLAY 1", "zPLAY 2" or
the unit is on
"zPLAY 3".
or in standby
mode)
Cancel
Press [z, PLAY] twice to clear the timer
indicator from the display.
The timer will start at the preset time, with the volume
increasing gradually to the preset level.

Sleep timer

The sleep timer can turn the unit off after a set time.
Press [SLEEP] to turn the sleep function on or off.
Press [SLEEP] once to check the remaining time.
The play timer and sleep timer can be used together. The
sleep timer always has the priority. Be sure not to overlap the
timer settings.
When AUTO OFF is ON and the unit is left unused for about
30 minutes, the unit will shut down even if the play time or
sleep time has not expired.
Preset EQ
Press [PRESET EQ] repeatedly to select
"HEAVY", "SOFT", "CLEAR", "VOCAL" or
"FLAT".
Bass or Treble
 Press [BASS/TREBLE] repeatedly to
select "BASS" or "TREBLE".
 Press [e,r] to adjust the level
(-4 to +4).
Press [SURROUND] repeatedly during
Surround
Sound
play to select "ON SURROUND" or
"OFF SURROUND".
If interference in FM stereo reception
increases, cancel the surround sound
effect.
D.Bass
Press [D.BASS] repeatedly during play to
select "ON D.BASS" or "OFF D.BASS".
Press [RE-MASTER] repeatedly during
Re-master
play to select "ON RE-MASTER" or
"OFF RE-MASTER".
Digital remaster is effective on MP3.
Analogue remaster is effective on
iPod/iPhone and AUX.
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents