Panasonic Viera TX-26LXD60A Operating Instructions Manual page 39

Easy
Automatic Input switching-When the connected Panasonic equipment is operated,
playback
input mode is switched automatically. When it is stopped operating, input mode is
returned.
Power on When the connected equipment starts playback or direct navigator or function
link
menu are activated, the TV is automatically turned on. (Only when TV is in
Standby mode.)
Power off
When TV is set to Standby mode, the connected Panasonic equipment is also
link
automatically set to Standby.
Note
•
Setup the equipment to enable this function. Read the manual of the equipment.
•
This function may not work normally depending on the equipment condition.
•
This function may not work normally when Panasonic Player theatre is connected.
•
The equipment can be operated by TV's remote control with this function on even if TV is in Standby
mode.
•
Image or sound may not be available for the fi rst few seconds when the playback starts.
•
Image or sound may not be available for the fi rst few seconds when Input mode is switched.
•
Volume function will be displayed when adjusting the volume of the equipment.
39