Panasonic NV-DS12B Operating Instructions Manual page 24

PROGRAMME AE
FOCUS
AUTO
MNL
MODE
SELECT
PUSH
Title
Recording with Special Effects
(Digital Effects) (Continued)
º Wipe Mode
It gradually replaces a still picture of the last recorded
scene with the moving picture of the new scene, like
drawing a curtain.
WIPE
WIPE
WIPE
º Mix Mode
It gradually fades out a still picture of the last recorded
scene while fading in the moving picture of the new
scene.
MIX
MIX
MIX
50
CAMERA FUNCTIONS
1.CAMERA SETUP
2.DIGITAL EFFECT
3.CARD SETUP
4.RECORDING SETUP
5.DISPLAY SETUP
6.OTHER FUNCTIONS
7.DEMO MODE
PRESS MENU TO EXIT
DIGITAL EFFECT
EFFECT1 OFF [&ZOOM [
ZOOM WIPE MIX
STROBE GAINUP
TRACER MOSAIC
MIRROR
EFFECT2 OFF NEGA SEPIA
B/W SOLARI
RETURN ---- YES
ON
PRESS MENU TO EXIT
OFF
Procedure
1 2
Set [EFFECT1] on the Press the Recording
[DIGITAL EFFECT] Sub- Start/Stop Button to
Menu to [WIPE] and exit start recording.
the Menu. (p. 48) The normal recording
The [WIPE] Indication starts.
appears.
ON
OFF
PUSH
1 2
Set [EFFECT1] on the Press the Recording
[DIGITAL EFFECT] Sub- Start/Stop Button to
Menu to [MIX] and exit start recording.
the Menu. (p. 48) The normal recording
The [MIX] Indication starts.
appears.
ON
OFF
PUSH
3 4
Press the Recording Press the Recording
Start/Stop Button to Start/Stop Button to
pause recording. start recording again.
The last picture is stored The last picture of the
in memory. previous scene is
The [WIPE] Indication gradually replaced by the
changes to [B]. new scene.
ON ON
OFF OFF
3 4
Press the Recording Press the Recording
Start/Stop Button to Start/Stop Button to
pause recording. start recording again.
The last picture is stored The last picture gradually
in memory. fades out while the new
The [MIX] Indication scene fades in.
changes to [C].
ON ON
OFF OFF
Remarks, etc.
³If you perform any of the following operations after
performing Step 3, the picture stored in memory is
erased and the Wipe Function cannot be used:
³ Selecting any other digital function in [EFFECT1] or
in [EFFECT2] on the [DIGITAL EFFECT] Sub-Menu.
Using the Camera Search Function.
³
Wipe from a Photoshot Still Picture
Instead of performing the Wipe from the last recorded
picture, you can store a still picture in memory by
pressing the [PHOTO SHOT] Button after Step 1 and
then perform Step 4.
³If you perform any of the following operations after
performing Step 3, the picture stored in memory is
erased and the Mix Function cannot be used:
³ Selecting any other digital function in [EFFECT1] or
in [EFFECT2] on the [DIGITAL EFFECT] Sub-Menu.
³ Using the Camera Search Function.
Mix from a Photoshot Still Picture
Instead of performing the Mix from the last recorded
picture, you can store a still picture in memory by
pressing the [PHOTO SHOT] Button after Step 1 and
then perform Step 4.
51