Panasonic NV-DS11EN Operating Instructions Manual page 83

i
Time Code
Time Code signals are the data which indicates the time
in hours, minutes. seconds and frames (25 frameslsec).
Having this data included in the recording gives every
single picture on the tape its own address.
*The Time Code is automatically recorded as pan of the
sub code with every recording you make.
OWhen you insert a new (previously unrecorded)
cassette. the Time Code automatically stans from zero.
If you insert a recorded cassette. the Time Code
continues where the time code of the last previous
scene stopped. (In this case, the zero indication
[OhOOmOOsOOf] may appear after inserting the cassette,
but when the recording starts, the Time Code records
from theprevious value.)
*YOU cannot reset the Time Code to zero.
-In playback modes other than the Normal Playback
Mode. the Time Code may not be displayed (or not be
carrect).
*Unless the Time Code is recorded continuously from
the beginning of the tape. precise editing may not be
possible. To ensure that the Time Code is recorded
without interruption, we recommend that you use the
Camera Search Function (+ 56) or Blank Search
Function (+ 58) before starling to record a new scene.
Memory Stop Function
The Memory Stop Function is convenient for the tollowing
operations.
Rewinding or fast-forwarding the tape to a
desired position
1
Reset the Tape Counter to zero at the tape
position from which you want to play back
later.
(-i
134)
2
Set [DISPLAY] on the [DISPLAY SETUP]
Sub-Menu of the [VCR FUNCTIONS] or the
[CAMERA FUNCTIONS] Main-Menu t o
[MEMORY].
3
Start playback or recording.
4
After playback or recording is finished:
Press the [VCRICAMERA] Button s o that
the [VCR] Lamp lights.
5
Rewind the tape.
The tape automaticaily stops approximateiy at the
position at which you reset the counter to zero.
Stopping the editing automatically
in
audio
dubbing
1
Reset the Tape Counter to zero at the tape
position at which you want the editing to
stop.
2
Set [DISPLAY] o n the [DISPLAY SETUP]
Sub-Menu of the [VCR FUNCTIONS] o r the
[CAMERA FUNCTIONS] Main-Menu to
[MEMORY].
3
Play back a still picture at the point at
which you want the audio dubbing to start.
4
Start the audio dubbing.
(-i
98)
The
avdlo diibbing automatically stops
e$proxnir:e!y at the position at iihich
),ou
rese:
:Ck
CZUP,:PI
! I
ZSIY.