Restoring Backed Up Data - Panasonic SC-PTX7 Operating Instructions Manual

Restoring backed up data

This function will restore the backup data that was
saved on your PC to this unit.
If the HDD requires service, please wait until the HDD
has been repaired before restoring the backup to the
HDD.
Restoring the backup data to the HDD will reset
the HDD (no tracks on the HDD). If restoring
fails, the content of the HDD will be lost. When
restoring the backup data, therefore, please
exercise the utmost caution.
Perform "Preparation" and "Settings to check on the PC"
as described on page 81.
1
Press [SETUP].
2
Press [3 4] to select "Other Setup" and press
[ENTER].
3
Press [3 4] to select "Maintenance" and press
[1].
4
Press [3 4] to select "Backup/Restore" and
press [ENTER].
5
Press [3 4] to select "Restore" and press
[ENTER].
6
Press [3 4] to select "PC Name" and press
[ENTER].
When the PC name is displayed
The PC name and other information that was used
when previous backups and imports (➜ page 44)
were performed may be displayed. In this case,
check the PC name again, and if necessary, follow
the steps below to make changes.
7
Enter the characters (➜ page 62).
Input the "User Name" and "Password" in steps 6
and 7 in the same manner.
8
Press [3 4 2 1] to select "Restore" and press
[ENTER].
Restore begins.
A message will be displayed, indicating that restore
is complete. The unit will briefly stay this way, and
then it will turn off automatically shortly after.
To return to the previous screen
Press [RETURN].
Restore
PC Name
User Name
Password
Restore Cancel
ENTER
Cancel
To cancel restore
1 Press and hold [Í] during restoring.
2 Press [2 1] to select "Yes" and press [ENTER].
≥This unit is turned off and the restore is cancelled.
≥If restore is cancelled before completion, all
progress up to the point of cancellation will not be
recorded and the HDD will be completely empty.
Restore this unit again later.
NOTE
≥Restore may be cancelled if your PC is turned off
in an irregular manner or is forced to shut down
due to errors. In this situation, restore again from
the beginning. However, backups may not restore
when the backup data contains abnormalities.
Restore
This function will pause and the power will
turn off immediately.
Do you want to continue?
Yes No
ENTER
83