At Direct Connect Selection; Ncr 7052 Keypad Selection - Hand Held Products Scanteam 5700 User Manual

AT Direct Connect Selection

This selection allows you to connect the scanner directly to your terminal. No
keyboard is necessary when this selection is enabled.
Default = Disable.
Note: A direct connect cable is optional (versus "Y" cable) and may be ordered
from your distributor.
Note: The following Enable and Disable programming bar codes apply to
SCANTEAM 5700 software prior to software revision level 2.0.
✱
Enable Disable

NCR 7052 Keypad Selection [

This selection allows you to program the scanner to transmit the proper
keycodes when interfacing with a telephone, calculator, or PC AT type numeric
keypad layout. Choose the keypad layout that defines your keypad layout.
Default = Layout 1 (Telephone).
Note: NCR 7052 Keypad applies to the 5700–X1 models only.
✱
Layout 1 (Telephone)
Layout 2 (Calculator) Layout 3 (PC AT)
[ NCR 7052 applies to –X1 units only.
SCANTEAM 5700 User's Guide 3–5