American Standard Cadet 3 Round Front Total Toilet 2880.000 Features & Dimensions

CADET 3 ROUND FRONT TOTAL TOiLET
®
❑ 2880.000
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• 12" Rough-in (305mm)
• EverClean surface inhibits the growth of stain
®
and odor causing bacteria, mold and mildew on
the surface
• Features the Cadet
• Space saving round front siphon action
jetted bowl
• Fully-glazed 2-1/8" trapway with 2" ball pass
• Generous 9" x 8" water surface area
• Close-coupled tank with flat tank cover for
superior storage
• Oversized 3" flush valve with chemical
resistant flapper
• Chrome trip lever
• Speed Connect tank-to-bowl coupling system
®
• Sanitary dam on bowl with four point
tank stabilization
• 2 color-matched bolt caps
• Color matched solid plastic seat and cover
with EverClean surface
®
• Wax ring gasket with closet bolts
• 100% factory flush tested
• 5 year warranty
Nominal Dimensions:
718 x 438 x 733mm
(28-1/4" x 17-1/4" x 28-7/8")
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specification for
Non-Adjustability
To Be Specified:
❏ Color: ❏ White
❏ Supply with stop:
© 2008 AS America Inc.
3 Flushing System
®
CADET
718mm
(28-1/4)
FINISHED WALL
25mm ± 6mm
(1 ± 1/4)
216mm
(8-1/2)
416mm
(16-3/8)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
216mm 333mm
(8-1/2) (13-1/8)
305mm C/L OF OUTLET
(12)
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
*
iMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
K100
3 ROUND FRONT
®
TOTAL TOiLET
ViTREOUS CHiNA
438mm
(17-1/4)
SUPPLY
AS
REQ'D.
*381mm
(15)
352mm
*203mm
(13-7/8)
(8)
235mm
FINISHED (9-1/4)
FLOOR
*152mm
Revised 2/08
733mm
(28-7/8)
(6)