Panasonic SDR-H101 Operating Instructions Manual page 110

Do not use the unit for surveillance
purposes or other business uses.
≥ This unit was designed for consumer
intermittent use. It was not intended for
continuous use, or for any industrial or
commercial application resulting in
prolonged use.
≥ In certain situations, continuous use could
cause the unit to overheat and cause a
malfunction. Such use is strongly
discouraged.
When you are not going to use the unit
for an extended time
≥ When storing the unit in a cupboard or
cabinet, it is recommended that you place
a desiccant (silica gel) in with it.
/
SDR-H100
SDR-T70
When disposing of or giving away this
unit, note that:
≥ Formatting and deletion simply change the
file management information and cannot
be used to completely erase the data in
built-in memory or HDD of this unit. The
data can be recovered using commercially
available software or the like.
≥ We recommend that you physically format
the built-in memory or HDD before
disposing of or giving away this unit.
≥
SDR-T70
To physically format the built-in memory,
connect the unit via the AC adaptor, select
[SETUP] # [FORMAT MEDIA] #
[Built-inMemory] from the menu, and then
press and hold the delete button on the
screen below for about 3 seconds. When
the built-in memory data deletion screen
appears, select [YES], and then follow the
on-screen instructions.
110
VQT3E82
/
SDR-H101
/
≥
SDR-H100 SDR-H101
To physically format the HDD, connect the
unit via the AC adaptor, select [SETUP] #
[FORMAT MEDIA] # [HDD] from the
menu, and then press and hold the delete
button on the screen below for about
3 seconds. When the HDD data deletion
screen appears, select [YES], and then
follow the on-screen instructions.
≥ Please look after the data in your built-in
memory or HDD carefully. Panasonic will
not be held responsible in the unlikely
case that private data is divulged.