Panasonic Viera TX-P50VT50T Operating Instructions Manual page 9

3
Attach the bracket
and fix with assembly screws
B
C
■
Securing the TV
Use the assembly screws
●
Tighten the four assembly screws loosely at first, then tighten them firmly to fix securely.
●
Carry out the work on a horizontal and level surface.
Arrow mark
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
2 Pull out the pedestal from the TV.
3 Remove the assembly screw
4 Remove the assembly screws
5 Remove the assembly screws
Adjusting the panel to your desired angle (TX-P50VT50T)
●
Do not place any objects within the full rotation range.
to the tabs of the neck
Tabs (top)
D
(TX-P50VT50T) / (TX-P55VT50T, TX-P65VT50T) to fasten securely.
(TX-P50VT50T) /
Hole for pedestal installation
(TX-P50VT50T) /
from the cover.
from the bracket.
from the back of the base and pull out the neck.
(View from the top)
4
Attach the cover
screw
E
(TX-P55VT50T, TX-P65VT50T)
(TX-P55VT50T, TX-P65VT50T) from the TV.
10°
10°
and fix securely with assembly
A
9