Panasonic Viera TX-P50VT50T Operating Instructions Manual page 113

USB connection
● It is recommended to connect the USB HDD, USB Flash Memory or Communication Camera to the TV's USB ports
directly.
●
Some USB devices or USB HUB may not be used with this TV.
●
You cannot connect any devices by using USB card reader.
●
You cannot use two or more same kind of USB devices simultaneously except USB Flash Memory or USB HDD.
●
Additional information for the devices may be on the following website. (English only)
http://panasonic.jp/support/global/cs/tv/
Bluetooth Setup
You can use Bluetooth keyboards ∗
[Bluetooth Setup] in the Setup Menu (p. 46).
∗ 1: HID (Human Interface Device Profile) compliant keyboards are available.
∗ 2: A2DP (Advanced Audio Distribution Profile) compliant audio devices are available.
Menu Item
Devices
Bluetooth Audio
Settings
● To adjust volume of this audio device
● This setup is not for the 3D Eyewear and the VIERA Touch Pad Controller supporting Bluetooth wireless technology.
●
Additional information for the devices may be on the following website. (English only)
http://panasonic.jp/support/global/cs/tv/
and Bluetooth audio devices ∗
1
Adjustments / Configurations (alternatives)
Searches and registers the available devices
●
You cannot use two or more A2DP compliant audio devices simultaneously.
[Not paired]:
The device is not registered. Register the device by following the on-screen
instructions to use with this TV.
[Connected]:
The device is registered and you can use with this TV.
[Not connected]:
The device is already registered, but not connected to this TV. Check the device
is turned on and the available range.
Adjusts the delay time if the sound of the audio device does not synchronise the
image
●
This function is available only for the Bluetooth audio devices.
●
Set [Lip Sync] to [On] and adjust in [Lip Sync Adjustment].
[Headphone Volume] (p. 44)
(headphones, etc.) with this TV by setting
2
113