Panasonic Viera TX-P50VT50T Operating Instructions Manual page 45

Menu Item
Audio Type
SPDIF Selection
HDMI1 / 2 / 3 / 4 Input
SPDIF Delay
Reset to Defaults
Connection Test,
Network Connection,
Wireless Network
Settings,
IP/DNS Settings
Network Link Settings
Software Update
New Software Message
Network Status
Timer Programming
Off Timer
Auto Standby
Adjustments / Configurations (alternatives)
Narration settings for visually impaired users (only available in some countries)
[Standard] / [Visual Impaired]
●
Set to [Visual Impaired] to activate the narration sound track when available on
the broadcast.
● For DVB mode
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT
and HDMI2 (ARC function) terminals [Auto] / [PCM]
[Auto]: Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are output as
Dolby Digital Bitstream. MPEG is output as PCM.
[PCM]: Digital output signal is fixed to PCM.
●
For DVB mode or video contents of Media Player / Network services (p. 83, 95)
●
ARC (Audio Return Channel): A function of digital audio output using HDMI
cable
Selects to fit the input signal [Digital] / [Analogue] (p. 112)
[Digital]: When sound is carried via the HDMI cable connection
[Analogue]: When sound is not carried via the HDMI-DVI adaptor cable
connection
●
For HDMI input
Adjusts the delay time of the sound output from DIGITAL AUDIO OUT and HDMI2
(ARC function) terminals if the sound does not synchronise the image
●
For DVB mode
Press the OK button to reset the current Sound Mode, [Balance], [Headphone
Volume] and [Surround] to the default settings
Sets the network setting to use in your network environment (p. 89, 90)
Sets to control the TV with the devices connected to the network (p. 88)
Checks for available software updates from the Panasonic website
Selects whether to give a notification message when new software is found via
network [Off] / [On]
Displays the network status (MAC Address, current network settings, etc.)
Sets a timer to record or remind forthcoming programmes (p. 59)
●
For DVB mode
Sets the duration of time until the TV automatically goes into Standby mode
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p. 23)
Sets the duration of time that the TV will remain on when no operation is
performed [Off] / [2] / [4] (hours)
●
Starting Timer Programming automatically does not affect this function.
●
Automatic input switching with the connected equipment affects this function
and time-count will be reset.
●
The notification message will appear 3 minutes before going into Standby mode.
45