Panasonic SC-PM41 Operating Instructions Manual page 10

CDs and MP3 – Play (Continued)
Finding your CD titles Finding your CD titles
This function allows you to display disc, album and
track titles, then select to start play.
Press [CD 6] and then [CLEAR 7].
1
Press [PLAY LIST].
2
The CD selection screen appears.
Press [5] or [∞] to select the disc title, then press
3
[ENTER].
4
MP3
Press [5] or [∞] to select the album, then press
[ENTER].
CD-DA MP3
Press [5] or [∞] to select the track, then press
[ENTER].
OR
To select play list using the main unit:
Press [CD 6] and then [STOP 7, –DEMO].
1
Press [PLAY LIST].
2
The CD selection screen appears.
Press [+] or [–] to select the disc title, then press
3
[ENTER].
4
MP3
Press [+] or [–] to select the album, then press
[ENTER].
CD-DA MP3
Press [+] or [–] to select the track, then press
[ENTER].
To return to the previous display, press [RETURN].
• This function does not work during any random mode.
10
RQT8043
CD-DA
Total tracks
Repeat play Repeat play
MP3
You can repeat program play or other selected
play mode.
Press [REPEAT] before or during play.
"REPEAT ON" and "
To cancel
Press [REPEAT] again.
"REPEAT OFF" is displayed and "
Direct access play Direct access play
This function allows you to start play from a specifi c track.
CD-DA
Press the numeric buttons to select and play your
desired track.
MP3
Press [ALBUM
1
2 Press [3/FF/¢] once and then the numeric buttons
to select and play your desired track.
For two-digit track, press [h10] once then the two digits.
For three-digit track, press [h10] twice then the three digits.
• This function does not work during any random/program mode.
Marking a track Marking a track
Enable you to mark one track for each loaded disc
so that you can directly play the track later.
During play, press and hold the [MARKER] until
"STORING" blinks on the display to mark your favourite
track.
Press [MARKER] during play or stop mode to recall and
play a marked track.
• The marker memory is clear when you open the CD tray.
• This function does not work during any random/program mode.
INTRO function (Album scan) INTRO function (Album scan)
This function allows you to fi nd an album by listening
to the fi rst track of all albums in the current disc for
10 second each.
Press [CD 6] and then [CLEAR 7].
1
2 Press [INTRO] to start the intro function.
While your desired album is playing, press [CD 6].
3
Intro mode cancelled and the playback continues.
INTRO function is cancelled after playing the fi rst track in
the last album.
To stop during the process, press [INTRO] or [CLEAR 7].
• This function does not work during any random/program mode.
CD-DA
" are displayed.
" is cleared.
or ] to select the album.
CD-DA
MP3
MP3
MP3