Connecting With A Rca Cable - LG 32LF73 Series Owner's Manual

EXtERnAl EQuIPmEnt SEtuP
Connecting with a Euro Scart Cable
➊ Connect the Euro scart socket of the VCR to the
the TV.
➋ Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owner's manual.)
AV1
➌ Select
➍ If connected to
NOTE
► Any Euro Scart cable used must be signal shielded.
► Copy-protected programmes will not be output on the EURO scart sockets for
(RGB)
legal reasons. Even if it was output, the video signals fed through the EURO
scart sockets will be not recorded by copyright protection systems.
Scart Output
Main Input
ANTENNA IN
Digital TV
Analogue TV
AV1 (SCART1)
AV2 (SCART2)
Component
AV3(CVBS)
(RGB)
HDMI4 (Only 32/42LF73**)

Connecting with a RCA Cable

ANTENNA IN
➊ Connect the
colours (Video = yellow, Audio Left = white, and Audio Right = red)
➋ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the
VCR owner's manual.)
AV3
➌ Select
(R) AUDIO (L)
AUDIO/
VIDEO
NOTE
► If you have a mono VCR, connect the audio cable from the VCR to the
AUDIO L/MONO
GB-20
INPUT
input source using the
AV2
Euro scart socket, select
S-VIDEO
ANT OUT
OUTPUT
ANT IN
SWITCH
CVBS
RGB
CVBS
RGB
(Analogue TV if the TV mode you last
HDMI
HDMI2
HDMI3
AUDIO/VIDEO
jacks between TV and VCR. Match the jack
INPUT
input source using the
jack of the TV.
AV1
Euro scart socket on
3
2
1(DVI)
button on the remote control.
AV2
input source.
VIDEO
L R
AV1 (SCART1 Output)
Mute
Mute
watched is Analogue mode.)
button on the remote control.
(RGB)
ANTENNA IN
➊
(R) AUDIO (L)
AUDIO/
VIDEO
AV2 (SCART2 Output)
Digital TV
Analogue TV
AV1 (CVBS)
AV2 (CVBS)
Mute
Mute
AV3 (CVBS)
Mute
Mute
Mute
Mute
➊
AV IN 3
H/P
S-VIDEO L
VIDEO R
OUTPUT
SWITCH
ANT IN
ANT OUT