HP dx2250 Specifications page 6

QuickSpecs
System Details
Technology and Features Memory Type
Chassis
Unit Environment and
Operating Conditions
System Board
Hard Drive Interfaces
Supported
Front Panel
Cooling Solutions
Supported
Slots Supported
Front I/O
Rear I/O
Drive Bays
Internal Speaker
Security
Power Supply
General Unit Operating Guidelines
Keep the computer away from excessive moisture, direct moisture and the extremes of heat and
cold, to ensure that unit is operated within the specified operating range.
Leave a 4 in (10.2 cm) clearance on all vented sides of the computer to permit the required airflow.
Never restrict airflow into the computer by blocking any vents or air intakes.
Do not stack computers on top of each other or place computers so near each other that they are
subject to each other's re-circulated or preheated air.
Occasionally clean the air vents on the front, back, and any other vented side of the computer. Lint,
dust and other foreign matter can block the vents and limit the airflow.
If the computer is to be operated within a separate enclosure, intake and exhaust ventilation must
be provided on the enclosure, and the same operating guidelines listed above will still apply.
Temperature Range
Relative Humidity
Maximum Altitude
(unpressurized)
NOTE: Operating temperature is de-rated 1.0 deg C per 1000 ft (300 m) to 10,000 ft (3000 m) above sea
level, no direct sustained sunlight. Maximum rate of change is 10 deg C/Hr. The upper limit may be limited
by the type and number of options installed.
Processor
DA - 12605 Worldwide — Version 19 — March 24, 2008
HP Compaq dx2250 Microtower Business PC
PC2-5300 DDR2 SDRAM (667-MHz) non-ECC
2 GB maximum system memory
Serial ATA 3.0-Gb/s hard drives are supported
Power button
Power On LED
HDD Activity LED
Power Supply Fan (variable speed)
Aluminum active heatsink (variable speed)
Chassis fan (variable speed)
Four (4) full-height expansion slots
Two (2) USB 2.0 ports
Standard Micro ATX I/O connectors, including four (4) USB 2.0 ports
Two (2) 5-1/4" external
One (1) 3-1/2" external
Two (2) 3-1/2" internal
Standard
Padlock loop
250-watt ATX Power Supply – PFC/non-PFC with a 115v/230v line switch
(varies by country/region)
Operating: 50° to 95° F (10° to 35° C)
Non-operating: –22° to 140° F (–30° to 60° C)
Operating: 10% to 90% (non-condensing at ambient)
Non-operating: 5% to 95% (non-condensing at ambient)
Operating: 10,000 ft (3048 m)
Non-operating: 30,000 ft (9000 m)
Socket AM2 industry standard Micro ATX form factor
Page 6