Panasonic Viera TX-P50VT50B Operating Instructions Manual page 9

Attaching / removing the pedestal
Warning
Do not disassemble or modify the pedestal.
●
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than the one provided with this TV.
●
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
● If you use the pedestal while it is physically damaged, personal injury may result. Contact your local Panasonic
dealer immediately.
During set-up, make sure that all screws are securely tightened.
●
If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Ensure that the TV does not fall over.
●
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury
may result.
Two or more people are required to install and remove the TV.
● If two or more people are not present, the TV may be dropped, and personal injury may result.
When removing the pedestal from the TV, do not remove the pedestal by the methods other than the specified
procedure. (p. 10)
●
Otherwise the TV and / or pedestal may fall over and become damaged, and personal injury may result.
Assembly screw
(black)
(5) (TX-P50VT50B)
( )
(1)
TX-P55VT50B
TX-P65VT50B
●
XYN4+F10FNK
M4 × 10
Neck
●
TXFBL5Z0084 (TX-P50VT50B)
(
●
TXFBL5Z0087
TX-P55VT50B
TX-P65VT50B
■
Assembling the pedestal
1
Insert the tabs of the neck
firmly
D
Assembly screw
(silver)
(7) (TX-P50VT50B)
(
(12)
TX-P55VT50B
TX-P65VT50B
●
XYN5+F16FN
M5 × 16
Cover
●
TXFBL5Z0092 (TX-P50VT50B)
●
TXFBL5Z0057
)
2
into the base
Tabs (bottom)
F
Bracket
●
TBL5ZA3254 (TX-P50VT50B)
● TBL5ZA3200
)
Base
●
TBL5ZX0243 (TX-P50VT50B)
( )
●
TX-P55VT50B TBL5ZX0327 (TX-P55VT50B)
●
TBL5ZX0426 (TX-P65VT50B)
TX-P65VT50B
Turn the base over and fix the neck
with assembly screws
●
Do not hold the neck when turning over the base.
(3) (TX-P50VT50B)
(4) (TX-P55VT50B, TX-P65VT50B)
B
F
Back of the base
( )
TX-P55VT50B
TX-P65VT50B
securely
TX-P50VT50B
Screw hole
TX-P55VT50B
TX-P65VT50B
9