Panasonic Viera TX-P50VT50B Operating Instructions Manual page 75

Setting for USB HDD / SD Card
Format and setup the USB HDD with this TV in order to use it for recording.
Depending on the conditions of the SD Card, the recording may not work properly. Formatting the SD Card with this TV
will resolve this problem. (All data will be erased when formatting.)
●
Before the settings, connect the USB HDD / SD Card (p. 74) and be sure to turn on the USB HDD.
●
Prepare the USB HDD for the exclusive use of recording with this TV.
Select [USB HDD Setup] or [SD Card Formatting] and set
Recording Setup
USB HDD Setup Access
SD Card Formatting Access
SD Card Information Access
Setup the USB HDD [USB HDD Setup]
All the USB devices recognised as a mass storage device will be listed.
● You can only choose one USB HDD for recording at a time.
● You cannot change the settings for the USB HDD while recording is in progress.
●
Please note that USB HDD will be formatted and all data in it will be erased after this setup.
1
Select the USB HDD for recording and start setup
USB HDD Setup
Product Name
USB Drive A
USB Flash Disk
2
Caution and confirmation of using USB HDD
Select [Yes] to proceed
USB HDD Formatting
The data recorded to the USB HDD with this TV can only
be played back on this TV.
You cannot playback it with other TV (including the TV
of the same model number) or any PCs.
If your TV is repaired due to a malfunction, the USB
HDD may not be available with your repaired TV.
Continue?
Yes No
select [Yes]
set
3
Confirmation of USB HDD name
USB HDD Formatting
Name : USB Drive A
Edit name?
Yes
The name for the USB HDD is created automatically. If you want to edit the name, select [Yes].
Set characters
USB HDD
Name USB HDD 1
● You can set characters by using
numeric buttons.
4
Confirmation to enable USB HDD for recording
If the formatted USB HDD for recording already exists, this confirmation screen will be displayed to switch to enable
this USB HDD for recording.
USB HDD Formatting
Do you want to enable this
device now for recording?
When disconnecting any USB device,
always use the "Safely Remove USB" function
in the USB HDD Device Setup menu to avoid
any corruption of recorded content.
Yes
select
access
select
access
USB HDD Formatting
To use this device for recording,
it must be formatted first.
Yes
select [Yes]
set
select
set
No
select [Yes]
set
No
●
To check the information of the inserted SD
Card
●
Some USB HDD may not be displayed.
●
For the information of the highlighted device
Continue?
No
select
set
[SD Card Information]
USB HDD Formatting
This device will be formatted and
all contents deleted.
Are you sure?
Yes No
select [Yes]
set
Store
75