Internal Buzzer (SP1)
The Internal Buzzer (SP1) can be
used to provide audible indications for
various beep codes. See the table on
the right for pin definitions.
Power LED/Speaker
On JD1 header, pins 1-3 are used for
power LED indication, and pins 4-7
are for the speaker. See the tables
on the right for pin definitions. Please
note that the speaker connector
pins (4-7) are used with an external
speaker. If you wish to use the on-
board speaker, you should close pins
6-7 with a jumper (Default).
JUIDB1
VGA
BMC
LAN2/LAN4
JI2C1
A1SAi/A1SRi Series Motherboard
Rev. 1.00
JI2C2
Battery
JWD1
JF1
1
J3
SP1
A
B
USB2.0-0/1
USB3.0-0/1
IPMI_LAN
LAN1/LAN3
Marvell
PHY
BIOS
JBT1
CPU
2-21
Internal Buzzer
Pin Definition
Pin#
Pin 1
Pos. (+)
Pin 2
Neg. (-)
PWR LED Connector
Pin Definitions
Pin Setting
Pin 1
Anode (+)
Pin2
Cathode (-)
Pin3
NA
Speaker Connector
Pin Settings
Pin Setting
Definition
Pins 4-7
External Speaker
Pins 6-7
Internal Speaker (Default)
COM1
FAN3
FAN1
Chapter 2: Installation
Definitions
Beep In
Alarm
Speaker
Definition
A. Internal Buzzer
B .
P W R
L E D /
Speaker Header