Component Names And Functions - Kenwood CORE-A55 Instruction Manual

Component names and functions

Main unit
1 Display (page 13)
2 VOLUME knob
K (page 17)
Press to switch the power of the system ON/OFF
(standby mode).
When the system is in standby mode, press to turn it
ON.
When the system is ON, press and hold for more
than a second to set it to standby mode.
VOLUME (page 16)
Rotate to adjust the volume.
E (pages 17, 18, 20, 22)
When the USB/SD/D.AUDIO source is selected, press
to start playback. The illumination changes from
white to blue at this time.
Press again to let the playback pause. The
illumination changes from blue to white.
Note on the illumination
The color of the illumination around the JOG knob
indicates the function of the JOG knob.
White: Rotating the JOB knob selects the audio source.
Blue: When the SD/USB/D.AUDIO source is selected, the
JOG knob functions as G/H and I/J.
12
CORE-A55/KAF-A55
1
3
6 5
2
2 4
3 JOG knob
INPUT SELECTOR (pages 17, 18, 20, 22, 23, 24)
When the illumination is white, turn clockwise or
counterclockwise to select the audio source.
G/H (pages 19, 21, 22)
When the USB/SD/D.AUDIO source is selected, rotate
clockwise or counterclockwise during playback to
skip the fi le.
I/J (pages 19, 21, 22)
When the USB/SD/D.AUDIO source is selected, rotate
clockwise or counterclockwise continuously during
playback to fast forward or fast reverse the playback.
4 SD slot (pages 17, 19)
Insert the SD card.
5 PHONES jack (page 11)
6 STANDBY indicator
Red lighting: Standby mode.
Extinguished: The system is ON.
Standby mode
When the [STANDBY] indicator is lit, a small amount
of power is supplied to the system to operate the
microcomputer. This status is referred to as the standby
mode. In this state, the system can be switched OFF
from the remote control unit.