Table of Contents
Advertisement
Front Panel
a
b
a 1 1 POWER
Switches the recorder ON or OFF.
b Disc Tray
Insert a disc here.
c Display window
Shows the current status of the recorder.
REC: The recorder is recording.
: Indicates when the recorder is in timer
recording or a timer recording is programmed.
: Shows the current status of the
recorder. (clock, program number, etc).
d Remote Sensor
Point the recorder remote control here.
e Z (OPEN/CLOSE)
Opens or closes the disc tray.
f RES. (RESOLUTION)
Sets the output resolution for HDMI and
COMPONENT OUTPUT jacks.
- HDMI: 1080i, 720p, 576p, 576i
- COMPONENT: 576p, 576i
Touch Pad Operation
The buttons from e to i are touch pad type button
that is operated with brief touch.
When you operate the button on the touch pad, you
should follow the directions as below.
1. Touch the any button on the touch pad.
The LEDs on the touch pad light up.
2. Touch the button you want to operate.
The LEDs on the touch pad will be off in 10
seconds after the operation.
c
d
e f g h i
k l
m
g
N / X (PLAY / PAUSE)
Starts playback.
Pause playback or recording temporarily,
press again to exit pause mode.
h
x (STOP)
Stops playback
i
z (REC)
Starts recording.
Press repeatedly to set the recording time.
j
CH (v/V)
Scans up or down through memorized
channels.
k
USB Port
Connect an USB Flash Drive.
l
DV IN
Connect the DV output of a digital camcorder.
m
AV IN 2 (VIDEO /AUDIO (Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/ Monitor, VCR,
Camcorder, etc.).
Precautions in using the touch pad
The LEDs on the touch pad lights only when the
power of the unit is on.
Use the touch pad with clean and dry hands.
Do not press the button on the touch pad with too
much force.
Do not touch the button on the touch pad with any
conductive material such as metalic object.
It may cause a malfunction.
j
7
Advertisement
Table of Contents
