Hookup And Settings; Rear Panel; Connecting To The Aerial - LG DR197 Owner's Manual

Hookup and Settings

Rear Panel

a b c
j k l
a AERIAL
Connect the aerial to this terminal.
b HDMI Connector (Type A)
(DR198H only)
HDMI output providing a high quality interface for
digital audio and video.
c EURO AV 2 DECODER
Connect the audio/video output of an external
source (Pay-TV decoder, Set Top Box, VCR, etc.).
d AV OUT 3 (VIDEO / AUDIO OUT (Left/Right))
Connect to a TV with video/audio inputs.
e AV IN 3 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/ Monitor, VCR,
Camcorder, etc.).
f COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
g OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
h Cooling fan

Connecting to the Aerial

Remove the aerial cable plug from your TV set and
insert it into the aerial socket at the back of the
recorder. Plug one end of the aerial cable into the TV
socket on the recorder and the other end into the
aerial input socket on your TV set.
RF coaxial connection
Connect the RF. OUT jack on the recorder to the
aerial input jack on the TV using the 75-ohm Coaxial
Cable supplied (R). The RF. OUT jack passes the
signal through from the AERIAL jack.
d e f g
m n
i AC Power Cord
j RF. OUT
k S-VIDEO OUT
l EURO AV 1 AUDIO/VIDEO
m VIDEO OUT SELECT Switch
n COMPONENT/PROGRESSIVE SCAN VIDEO
h
Plug into the power source.
Passes the signal from the AERIAL to your
TV/monitor
Connect to a S-Video Input on TV.
Connect to a TV with SCART jack.
Select either COMPONENT or RGB signal of
EURO AV1 AUDIO/VIDEO terminal depending on
how you connect the recorder to the TV.
OUT (Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.
Aerial
SCART INPUT
ANTENNA
INPUT
R
i
Rear of TV
VIDEO
AUDIO INPUT
INPUT
L R
Rear of the recorder
9