Hookup And Settings; Rear Panel; Connecting To The Antenna - LG RH277H Series Owner's Manual

Hookup and Settings

Rear Panel

a
g h i j
a ANTENNA IN
Connect the antenna to this terminal.
b COMPONENT OUTPUT (Y P
Connect to a TV with Y P
c AV 2 DECODER SCART jack
Connect the audio/video output of an external
source (Pay-TV decoder, Set Top Box, VCR, etc.).
d HDMI OUTPUT (Type A)
HDMI output providing a high quality interface for
digital audio and video.
e Cooling fan
f AC Power Cord
Plug into the power source.
g ANTENNA OUT
Passes the signal from the ANTENNA IN jack to
your TV/monitor.

Connecting to the antenna

Remove the antenna cable plug from your TV set and
insert it into the antenna socket at the back of the
recorder. Plug one end of the antenna cable into the
TV socket on the recorder and the other end into the
antenna input socket on your TV set.
RF coaxial connection
Connect the ANTENNA OUT jack on the recorder to
the antenna input jack on the TV using the 75-ohm
Coaxial Cable supplied (R). The ANTENNA OUT jack
passes the signal through from the ANTENNA IN jack.
10
b c d
k l
P )
B R
P inputs.
B R
e
h OPTICAL (Digital audio output jack)
Connect to digital (optical) audio equipment.
i COAXIAL (Digital audio output jack)
Connect to digital (coaxial) audio equipment.
j S-VIDEO OUTPUT
Connect to a S-Video Input on TV.
k AUDIO OUTPUT (Left/Right)
Connect to a TV with audio inputs.
l AV 1 SCART jack
Connect to a TV with SCART jack.
Aerial
ANTENNA
INPUT
R
f
Rear of TV
SCART INPUT
VIDEO
AUDIO INPUT
INPUT
R
L
Rear of the recorder