in the Intelligent Auto Mode or set the shutter speed to 1/100 in areas where the power
supply frequency is 50 Hz, or 1/125 in areas of 60 Hz.
≥ Brightness of the image displayed on the LCD monitor may be different from brightness of
the image actually recorded during the Still Picture Recording Mode. Confirm the image on
the playback screen after recording.
Manual iris/gain adjustment
≥ Luminance level and histogram are displayed during the iris adjustment. (l 69)
≥ If the gain value is increased, the noise on the screen increases.
≥ Depending on the zoom magnification, there are iris values that are not displayed.
Recording with Manual Focus
If auto focusing is difficult due to the conditions, then use Manual Focus.
/
HC-X900 HC-X909
Perform focus adjustments using the multi manual ring.
≥ Press the iA/MANUAL button or the CAMERA FUNCTION button to switch to Manual
Mode. (l 74)
For how to perform the settings when using the viewfinder, refer to page 75.
A Rotate the multi manual ring to adjust the focus.
HC-X800
≥ Press the iA/MANUAL button to switch to Manual Mode. (l 74)
/
HC-X900M
- 78 -
/MANUAL