Table of Contents
Advertisement
≥ The recording screen for 3D Recording Mode can be displayed in 3D on a 3D-
compatible TV when the 3D Conversion Lens (optional) is attached to this unit.
≥ If your television does not switch to a 3D image, make the necessary settings on the TV.
(For further details, please read the operating instructions for the TV.)
≥ It will be played back in 2D display for following cases:
j Connect the AV multi cable to the video terminal of the TV
j When [COMPONENT OUT] is set to [576i] and the AV multi cable is connected to the
component terminal of the TV
≥ When you play back scenes successively, a black screen will appear for a few seconds
between scenes recorded in 3D and scenes recorded in 2D.
≥ When you select a 3D image thumbnail, it may take a few seconds for playback to start.
After playback, the thumbnail display may take a few seconds to reappear.
≥ If you set [2D/3D DISPLAY] to [3D] with the unit connected to a television that does not
support 3D, the image will be played back in 2 screens.
≥ Depending on the 3D-compatible television used, switching to 3D mode may be slow and
you may not be able to watch the first scene. In this case, use the pause button.
≥ When viewing 3D image, your eyes may become tired if you are too close to the television
screen. Use the supplied remote control to operate from a distance.
- 111 -
Advertisement
Table of Contents
