Advertisement
—
—
I
I
I
I
I
A
Threading the needle thread
Switch off the main switch. Raise the presser
foot lifter (26). Turn the hand wheel until the take-
up lever (34) has reached its highest position.
Place the thread on the reel holder (38) and fit
the corresponding unwinding disk.
I
Now, using both hands, pull the thread into guide
(A). Pass the thread through the left threading
slot (32) downwards. Pull the thread around stop
(E) into the right-hand threading slot and up
wards to the take-up lever (34). The thread must
be pulled into the take-up lever from left to
right and downwards again in the right-hand
threading slot.
Finally pass the thread from the side between
one of the two thread guides (31).
To thread the needle, please refer to the next
page.
a)
a)
a)
•
0
D
'-4'
A
I'
N
IT
S
C
I
E
I,
I
I
I
I
I
I
26
Advertisement
