Tuner Operations; Tuning In To Stations Manually; Using Preset Tuning - JVC RX-D301S Instructions Manual

Audio/video control receiver
Hide thumbs Also See for RX-D301S:
Table of Contents

Advertisement

Tuner operations

Tuner operations are mainly done from the remote control.
FM/AM
FM MODE
TUNING/REW
1
4
7
10
NOTE
When you have selected "FM" or "AM" by using SOURCE
SELECTOR on the front panel, the remote control may not
work for tuner operations. To use the remote control for tuner
operations, select "FM" or "AM" by using FM/AM button on the
remote control.
28
MEMORY
FF/TUNING
2
3
5
6
8
9
0
10

Tuning in to stations manually

From the remote control ONLY:
1
Press FM/AM to select the band.
The last received station of the selected band is tuned in.
• Each time you press the button, the band alternates
between FM and AM (MW).
ANALOG
TUNED STEREO AUTO MUTING
L
R
S.WFR
2
Press repeatedly or hold TUNING 9 or
( TUNING until the station you want is
tuned in.
• Pressing (or holding) TUNING 9 increases the
frequency.
• Pressing (or holding) ( TUNING decreases the
frequency.
NOTES
• When you hold and release TUNING 9 or ( TUNING, the
frequency keeps changing until a station is tuned in.
• When a station of sufficient signal strength is tuned in, the
TUNED indicator lights up on the display.
• When an FM stereo program is received, the STEREO
indicator also lights up.

Using preset tuning

Once a station is assigned a channel number, the station can
be quickly tuned simply by selecting the number. You can
preset up to 30 FM and 15 AM (MW) stations.
To store the preset stations
Before you start, remember...
There is a time limit in doing the following steps. If the setting
is canceled before you finish, start from step 2 again.
From the remote control ONLY:
1
Tune in to the station you want to preset
(see "Tuning in to stations manually"
above).
• If you want to store the FM reception mode for this
station, select the FM reception mode you want. See
"Selecting the FM reception mode" on page 29.
ANALOG
TUNED STEREO AUTO MUTING
L
R
S.WFR
2
Press MEMORY.
The channel number position starts flashing on the
display for about 5 seconds.
ANALOG
TUNED STEREO AUTO MUTING
L
R
S.WFR
MHz
MHz
MHz

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx-d302b

Table of Contents