Removing The Data Card - Huawei 3G Data Card User Manual

2. Now the system will find the new hardware and initialize the new hardware
Installation Shield Wizard automatically.

Removing the Data Card

To remove the Data Card from your laptop, please use the hardware removing
function of the Windows system to stop the operation of the Data Card, and
then pull it out. Follow the procedure below:
1. Double-click the icon
Unplug or Eject Hardware dialog box is displayed.
2. Stop the use of the Data Card hardware "NEC PCI to USB Open Host
Controller".
3. After the system prompts that it is safe to remove the device, pull out the
Data Card.
Note
Do not remove the Data Card directly without following the above
procedures, lest your laptop may be harmed.
Do not remove the Data Card when the operating system is in the
Hibernate or Standby mode.
on the lower right of your laptop screen; an
5 Installation Guide
HUAWEI
7