Laptop Configuration Requirements
To use the Data Card, the following are required for your laptop:
A type II PCMCIA Card slot supporting CARDBUS.
A 133 MHZ Pentium processor or above. 500 MHz Pentium or the
microprocessor with higher frequency is recommended.
32 MB RAM or above. The memory of 128 MB or above is recommended.
30 MB idle hard disk or above.
Windows XP / 2000/ Vista operating system.
Display resolution of 800 % 600 pixels or above. Display resolution of 1024
% 768 pixels is recommended.
Preparing the Data Card
1. Take out the HUAWEI 3G Data Card from the protective cover.
2. As shown in the following figure, insert the SIM/USIM card into the slot
on the back of the Data Card, and make sure the golden contact on the card
is facing downwards.
4
Getting Started
5
HUAWEI