Maytag MAH22PNAGW0 Installation Instructions Manual page 12

Commercial automatic washer
Hide thumbs Also See for MAH22PNAGW0:
Table of Contents

Advertisement

Available languages

Available languages

h.01
h.
SUPER CYCLE TYPE (Skipped unless Super
Cycle pricing is enabled.)
01
This represents the super cycle upgrade option.
Press PERMANENT PRESS keypad to step
through upgrade options 1-3 as follows:
01 - enhanced wash, extra 3 minutes of wash
tumble in addition to the programmed
wash time.
02 - extra rinse for all cycles.
03 - both 01 and 02.
Press WOOLENS keypad once to advance
to next code.
J.Cd
J.
COIN OPTION
C
Coins selected.
d
Coins disabled.
Press DELICATES & KNITS keypad 3 consecutive
times for this selection.
Press WOOLENS keypad once to advance
to next code.
L.00
L.
PRICE SUPPRESSION
OPTION (Default)
This option causes the customer display to show
"ADD" or "AVAILABLE" rather than the amount of
money to add. (Used mainly in debit installations.)
00
Not Selected "OFE"
PS
PS Selected "ON."
Press DELICATES & KNITS keypad once for this
selection.
Press WOOLENS keypad once to advance
to next code.
n.CE
n.
CLEAR ESCROW OPTION
When selected, money held in escrow for
30 minutes without further escrow or cycle
activity will be cleared.
00
Not Selected "OFE"
CE
Selected "ON."
Press DELICATES & KNITS keypad once for this
selection.
Press WOOLENS keypad once to advance
to next code.
r.800
r.
8OO
TOP SPIN SPEED RPM
This can be selected from the following spin
speeds: 600 rpm, 750 rpm, 800 rpm, 1000
(displays as 999) rpm.
Step between speeds by pressing PERMANENT
PRESS.
Factory pre-set for 800 rpm.
Press WOOLENS keypad once to advance
to next code.
U.00
U.
PENNY INCREMENT
OFFSET
00
This option is not supported
for European Models
and the value must be set to 00.
00
This is the number of minutes of PREWASH.
Choose 0 to disable the prewash or select between
2 and 7 minutes by pressing the PERMANENT
PRESS keypad. Prewash time is added to overall
cycle time.
Press WOOLENS keypad once to advance
to next code.
A2.03 A2.
03
FINAL SPIN LENGTH
This is the number of minutes of final high speed
spin. Choose from 3-8 minutes by pressing the
PERMANENT PRESS keypad.
Press WOOLENS keypad once to advance
to next code.
If cycle counter (90C) is selected, the following is true:
100
Represents the number of
1 02 = 200
cycles in HUNDREDS
200
Represents the number of
cycles in ONES
2 2.5 = 25
Total = 225 cycles
This is "VIEW ONLY" and cannot be cleared.
Press WOOLENS keypad once to advance to next code.
If money counter
(1.00 or 1.00) is selected,
the following
is
true:
300
Number of coins in
3 01 = 400 x coin 1
HUNDREDS
400
Number of coins in ONES
4 68 = 272 x coin 1
500
Number of COINS.
5 7.5 = 3 x coin 1
END of SETUP PROCEDURES.
Total = 675 x coin 1
EXIT FROM SETUP MODE
PD Models: Reinstall access door.
PN Model: Remove power, open console, reinsert plug into AA1,
close console, and apply power.
12

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mah22pdagw0

Table of Contents