Table of Contents
Advertisement
BD18-Manual (AU)
1/18/06
11:47
AC Adaptor Connection
Please turn off the unit before plugging in the AC
adaptor. Otherwise the unit may be damaged.
Plug the adaptor jack (center positive type) into
the socket, located on the right of the unit.
Auto-off
If there is no input on the unit for a few minutes the unit will automatically turn itself off to conserve power.
When you are ready to start playing again just press the
Mouse Connection
1. Turn OFF the unit.
2. Thread the mouse cord through the hole behind the mouse storage area, located on the
back of the unit.
3. Plug the mouse into the mouse jack on the underside of the unit.
4. Turn the unit ON.
Page 8
button to turn the unit back on.
Caution
• The unit must not be connected to a power
supply greater than 9V.
• Only use the recommended adaptor.
• The adaptor is not a toy.
• Do not short-circuit the supply terminals.
• Toys liable to be cleaned with liquid are to
be disconnected from the power source before
cleaning.
4
Advertisement
Table of Contents
