Oregon Scientific BAR113 User Manual page 5

MAXIMUM AND MINIMUM
TEMPERATURES
The maximum and minimum recorded temperatures will be
automatically stored in memory. To display them, press MEM.
Press MEM again to alternate between the maximum, minimum,
and current temperatures. The respective MAX or MIN indicator
will be displayed.
To clear the memory, press MEM button and hold for three seconds.
The maximum and minimum-recorded temperatures will be erased.
Subsequently, if you press MEM after the memory has been erased,
the maximum and minimum temperature will have the same values
as the current reading.
DISCONNECTED SIGNALS
If without obvious reasons the display for a particular channel
goes blank, press CHANNEL and MEM simultaneously to enforce
an immediate search. If that fails, check:
1. The remote unit of that channel is still in place
2. The batteries of both the remote unit and main unit. Replace if
necessary.
Note: When the temperature falls below freezing point, the
batteries of outdoor units will freeze lowering their voltage
supply and the effective range.
3. The transmission is within range and the path is clear of obstacles
and interference.
Shorten the distance when necessary.
TRANSMISSION COLLISION
Signals from other household devices, such as door bells, home
security systems and entry controls, may interfere with those of
this product and cause temporarily reception failure. This is normal
and does not affect the general performance of the product. The
transmission and reception of temperature readings will resume
once the interference recedes.
NOTE ON °C AND °F
The unit of temperature display is selected on the °C/°F slide
switch. Select °C for Centigrade or °F for Fahrenheit.
Note: The remote temperature display on the main unit is dominated
by the selection on the °C/°F slide switch of the main unit. Whatever
the display units of the remote sensors, they will be automatically
converted to the choice of the main unit.
WEATHER FORECAST FUNCTION
The unit is capable of detecting atmospheric pressure changes.
Based on collected data, it can predict the weather for the forthcoming
12 to 24 hours. The effective range covers an area of 30 to 50 km.
Indicator
displays
on the unit
Forecast Sunny Slightly Cloudy
5
Rainy
Cloudy