Using Your Iron; To Dry Iron - Hamilton Beach 840159500 Use & Care Manual

840159500 Ev02.qxd 4/2/07

Using Your Iron

To Dry Iron

1. Plug in iron.
2. Turn Steam ON/OFF Lever to the
Dry Iron position.
3. Set Fabric Setting Indicator to
desired temperature. Allow the iron
to heat until the indicator box
around the selected fabric stops
blinking.
To Steam Iron
1. Unplug iron. Turn Steam ON/OFF
Lever to the Dry Iron
Set iron upright on heel rest. Using a
cup, slowly pour tap water into the
water tank opening until MAX fill line
is reached.
2. Plug in iron.
3. Press Temperature Selector. With
iron in an upright position, set Fabric
Setting Indicator to desired setting in
the steam range (see chart on page
6). Allow the iron to heat until the indi-
cator box around the selected fabric
stops blinking. Do not preheat the
iron with the soleplate facing down.
Features
Blast of Steam and Spray Buttons
Push Blast Button for an extra blast
Blast Spray
4
2:28 PM Page 4
4. To turn iron off, set Fabric Setting
4. Set Steam ON/OFF Lever to steam.
position.
5. To turn iron off, turn Steam ON/OFF
6. Empty water from the iron following
Water
Please use ordinary tap water. If you
have extremely hard water, alternate
between tap water and distilled water
for use in the iron.
(on select models)
Quick Off
Press and hold the Temperature
of steam. Push
Spray Button to
release a fine
spray of water
for difficult wrin-
kles in cotton or
linen.
Indicator to OFF and unplug iron.
The iron may be turned off by press-
ing the Temperature Selector button
for 3 seconds.
Lever to Dry Iron . Press
Temperature Selector. Set Fabric
Setting Indicator to OFF and unplug
iron. The iron may be turned off by
pressing the Temperature Selector
button for 3 seconds.
directions in "Caring for Your Iron
and Soleplate."
Selector for
3 seconds to
turn the iron off
quickly.
Temperature
Selector