Programme Selector - Hoover HP 16 E Instructions For Use Manual

40000650-Eng.qxd 07/10/2003
"Energiebesparing" button
This option can be utilised on all programmes. By selecting the option, the wash
temperature is limited to the water inlet temperature. It is particularly suggested in
the case of lightly soiled fabrics, and allows you to save 80% of energy compared
with the normative at 60%.
"Snel Strijken" button
This option is available on cottons, synthetics, delicates and the Handwash
special programme. When this option is selected for cottons, woollens and the
Handwash programmes, the machine will stop in the final rinse stage and the load
will be held within the water in the drum. This reduces the creasing thus enabling
easier ironing. To continue with the wash cycle, press the "Snel Strijken" button
and the programme will restart.
When the option is selected for synthetics the programme is completed by a
short, very low spin speed. The laundry may be left in the drum in this condition
without the risk of excessive creasing. If a spin cycle is required please select the
appropriate spin (see Programme Guide).
When the option is selected for delicate programmes, the machine stops in the final
rinse stage and the load will be held within the water in the drum, thus reduces
creasing and enabling easier ironing. Press the "Snel Strijken" button to continue with
the programme. The machine will then pump out the remaining water and the
programme will conclude with a low speed spin for approximately 15 seconds. Finally,
the programme carries out a brief tumbling action to "loosen" the items in the load.
Spin Speed Selector (Centrifugeren)
By adjusting the control knob it is possible to reduce the maximum speed of your
selected programme to suit your needs and help reduce creasing of fabrics.
Turn the spin speed selector knob until the indicator aligns with the required spin.

PROGRAMME Selector

Note: do not press the START/PAUZE button before selecting the
programme. If this does happen, cancel the programme (that you
have accidentally selected) by pressing the Start/Pauze button
for five seconds (see "Programme cancelled" description).
The tables in the washing section describe the various programmes and illustrate
the number or symbol to select for them.
Note: this model is fitted with an electronic "sensor" device that
checks the load is balanced correctly. If the load is slightly
unbalanced the machine will re-balance it automatically to then
carry out the normal spin.
If, after several attempts, balance is not restored a reduced spin
speed will be used.
If loads are seriously unbalanced the spin stage will be cancelled.
This helps limit vibration, reduce noise and improve the washing
machine's reliability and life.
14:23 Page 13
13