Basic Functions; Displaying The Alarm Time; Setting The Alarm Time - Oregon Scientific RM818P User Manual

BASIC FUNCTIONS

When the alarm sounds:
• The backlight will go on for 5 seconds;
• The projection will go on for 5 seconds;
• And if you have a vibration device, it will vibrate
for 1.5 minutes.
To turn off the alarm sound:
• Press any button.
NOTE If you do not press any button, the alarm will
automatically stop ringing after 2 minutes.

DISPLAYING THE ALARM TIME

By default, the unit's LCD screen displays the current
date and month.
To display the alarm time instead:
1. Press the ALARM button.
DIFFERENT ALARM MODES
RM818P English R7
NOTE
optional vibrating wake up device.

SETTING THE ALARM TIME

Press and hold the Alarm button for 2 seconds to enter
the Alarm Setting mode.
To adjust the alarm time, make sure that the alarm time
is currently displayed on the LCD screen. (To do this,
press the ALARM button).
To set the alarm time:
1. Press and hold the ALARM button for 2 seconds.
2. Adjust the hour of the alarm time by using the UP
and DOWN buttons.
14
14
The three squiggly lines indicate "on" for the
7/14/04, 3:58 PM