Installation; Choose A Location - Hoover 6+4 Kg Wash'n dry Sensor Instruction Book

40002476.qxd 21/02/2005

Installation

Do not plug the
machine in and switch
it on at the mains until
the installation is
completed.
6
13:18 Page 6
7.
8.

Choose a location

●
●
●
Take the two plastic fixing clips and fix the base panel to
the base of the machine. Bring the machine back to the
upright position.
Cover the central hole in the rear of the machine with the
cap enclosed in the instruction bag.
After the machine has been installed, ensure that the
mains plug and water supply valves are easily accessible.
Make sure there is enough space for the machine. Select a
space at least 600mm wide and 850mm high. Also leave
enough space to open the door fully so you can load and
unload it easily.
Keep the area underneath and around the machine free
of combustible materials such as lint, paper, rags,
chemicals etc.