Install Drain Hose - KitchenAid KUDE20IXSS9 Installation Manual

INSTALLATION
INSTRUCTIONS
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
[_!_ j Disconnect powe
I Disconnect electrical power at the fuse box or circuit I
breaker box before installing dishwasher. J
Shut offthe water supply to the dishwasher. J
_3JDo you utility
already
have
hookups?
Yes nFollow instructions in the "Prepare Cabinet
Opening--Existing Utilities" section.
NO --Follow instructions in the "Prepare Cabinet
Opening--New Utilities" section.
_- Existing utility hookups No g L ity hookups
Water line
If the water line and the cable extend to the locations shown,
proceed to the "Install Drain Hose" section. If they do not reach far
enough, follow the instructions in the "Prepare Cabinet Opening--
New Utilities" section.
Prepare and route the electrical supply
What type of electrical
connection will
you use?
Direct Wire:
Follow Opti0n B iostructi0ns
Option A, Power Supply Cord:
NOTE: A grounded 3 prong outlet is required inside a cabinet next
to the dishwasher cabinet opening.
Drill a 1V2"(3.8 cm) hole in cabinet side or rear.
See "Product and Cabinet Opening Dimensions" section.