KitchenAid KEBS209BSP00 Installation Instructions Manual page 12

1.
2.
3.
In IIO" .......
Using 2 or more people, lift the oven partially into the cabinet
cutout. Use the oven opening as an area to grip.
NOTE: Push against seal area of the oven front frame when
pushing the oven into the cabinet. Do not push against the
outside edges.
t
/
Push against the seal area of the front frame to push the oven
into the cabinet until the back surface of the front frame
touches the front wall of the cabinet.
:%(;
A. Shipping foot
4.
Insert the grommet into the mounting rail hole using a flat-
blade screwdriver. Insert the screwdriver into the grommet
and turn 1/4turn counterclockwise. Make sure the grommet
stays in position.
5.
6.
A. Mounting rail
B. Mounting rail hole
C. Grommet
Securely fasten oven to cabinet using the # 8-14 x 1" screws
provided. Insert the screws through hole in the grommet. Do
not overtighten screws.
On models with the foot positioned with the long side of the
foot facing toward the top of the oven, the oven vent is taped
to the side of the oven. See the following instructions to
install.
• Align vent tab (B) with oven frame (A) as shown.
• Using one #8-18 x 3/8"screw (D) on each side of the vent
tab (B), fasten the vent securely to the oven.
Push oven completely into the cabinet and center the oven
into the cabinet cutout.
NOTE: If you have model KEBK171 B, KEBK101 B,
KEBK276B, KEBK206B, KEBS179B, KEBS109B, KEBS277B,
KEBS279B, KEBS207B, KEBS209B, KEBU109B or
KEBU209B, proceed to Step 5.
A
A. Oven frame
B. Vent tab
C. Oven vent
D. #8-18 x 3/8" screws
B
12