INSTALLATION
REQUIREMENTS
TOOLS NEEDED:
Gather the required tools and parts before starting installation.
Read and follow the instructions
provided with any tools listed
here,
•
Hand drill or electric drill
•
Tape measure
(properly grounded)
•
Level
•
1/8"Drill bit
•
Phillips screwdriver
•
%6" Socket wrench
•
T30 TORX®tscrewdriver
Additional Tools Needed for Style 2: Overlay (only):
•
Scissors
•
Masking tape
•
Pencil
PARTS NEEDED Style 2: Overlay (only):
•
Custom Overlay Drawer Panels --
See "Style 2: Custom Overlay Drawer Panels."
Hardware
#8 x 1/2"Pan-head screws (12) optional
PARTS SUPPLIED:
•
#8 x 1/2"Pan-head
screws (16)
•
Mounting Brackets (4)
Bottom Overlay Drawer Panel Dimensions
26.5"
(67.4 cm)
7/8'1
(2.2om, .........................
T
14.5"
16.5"
(36,8 cm)
(42.0 cm)
23.5,,
(59.7 cm)
1.5"
(3.8 cm)
Flat Panels
You can create a custom flat panel using material less than s/.,,
(19.05 mm) thick. The material must be laminated to either
plywood or medium density fiberboard that is s/.,, (19.05 mm)
thick.
Raised Panels
You can create a raised panel design. Be sure to maintain a s/.,,
(19.05 mm) minimum thickness where the overlay panel attaches
to the drawer front.
Raised Panel Attachment
If you plan to install custom wood panels, you will need to create
the panels yourself or consult a qualified cabinetmaker
or
carpenter. See dimension drawings for panel specifications.
IMPORTANT:
•
The thickness of the overlay panels must be 6/4"
(19.05 mm).
•
Each overlay panel must not weigh more than 10 Ibs
(4.5 kg).
•
Overlay panels weighing more than recommended
may
damage the refrigerator drawers.
•
Do not exceed the height dimension for the overlay
panels. Panels that exceed the height dimension may
damage the refrigerator drawers, cabinets or countertop.
•
The width of the overlay panels may vary according to the
width of the cabinet opening.
Top Overlay
Drawer Panel Dimensions
26.5"
(67.4
em)
1.25"
(3.2om, .........................
T
10.5"
12.7"
(26,7
cm)
(32,2
cm)
_
23.5"
--_'H
(59.7
cm)
1.5"
(3.8 cm)
A. Drawer front
B. #8 x ½" pan-head
screw
C. Overlay panel
)
B
C
I"®TORX is a registered trademark
of Textron Innovations
Inc.