Key To Symbols; Symbols - Husqvarna 535FBX Operator's Manual

Symbols

WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious
or fatal injury to the operator or
others. It is extremely important
that you read and understand the
contents of the operator's manual.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• A protective helmet where there
is a risk of falling objects
• Hearing protection
• Protective goggles or a visor
This product is in accordance with
applicable EC directives.
The operator of the machine must
ensure, while working, that no
persons or animals come closer
than 15 metres.
Kickback may occur when the
nose or tip of the guide bar
touches an object, and cause a
lightning fast reverse reaction to
the side. May cause serious
personal injury. Always keep
people and animals at least 15
metres from the machine.
Always wear protective gloves.
Wear boots with saw protection, steel
toe-cap and non-slip sole.
Noise emission to the environment
according to the European
Community's Directive. The
machine's emission is specified in
chapter Technical data and on label.
2 – English

KEY TO SYMBOLS

Other symbols/decals on the machine refer to special
certification requirements for certain markets.
The engine is s witched off by moving
the stop switch to the stop position.
CAUTION! The stop switch
automatically returns to the start
position. In order to prevent
unintentional starting, the spark plug
cap must be removed from the spark plug when
assembling, checking and/or performing maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
worn.
Filling with chain oil and adjusting oil
flow