•
Adjust the chest strap vertically if needed and make
sure it fits well.
•
Adjust the shoulder straps to distribute the load evenly
across your shoulders.
•
Loosen or tighten the waist strap so that approx. 70%
of the load is on your waist and 30% on your
shoulders.
Setting the working height
•
Pull out the cord to the desired length and fasten as
shown.
•
Fasten the knot on the cord in the suspension ring on
the shaft. You can also make more knots on the cord
so that you are able to easily change between
different working positions.
•
During forestry clearing the cutting equipment should
be balancing a few decimetres above the ground.
18 – English
ASSEMBLY
•
Transport position
•
•
•
1
2
To shorten the cord, loosen it from the load reducer
and slacken it, which will make the cord spring back
automatically.
Fit the transport guard to the cutting attachment.
Dismantle the load reducer.
Position the load reducer as shown and fasten it.
2
1