Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. 6) The use of attachments not sold by Waring is not recommended and may be potentially hazardous. 7) Do not use outdoors.
➂ ➅ ➄ ➁ ➃ GRIND ➀ ➆ CHOP Parts Included: 1) Motor Base - with motor shaft and 3-position control switch. 2) Grinding work bowl. 3) Grinding work bowl cover. 4) Grinding blade (3-blade configuration). 5) Chopping work bowl. 6) Chopping work bowl cover.
• Cord: 5 Foot - 18 Gauge - Three Conductor Grounded Cord with Strain Relief • Commercial UL Listed Grounding Instructions • For your protection, the Waring Pro Prep ™ Chopper Grinder is supplied with a molded 3-prong grounding-type plug and should be used in combination with a properly connected grounding-type outlet, as shown below.
Page 5
For Commercial Use Operation 1) Put base on counter near electrical outlet. Do not plug in until the Pro Prep ™ Chopper Grinder is totally assembled. 2) Put empty work bowl (either grinding or chopping) on base, fitting center tube over shaft on base and place handle slightly to left of front center (7 o’clock).
Page 6
Food Service Usage: Care and Cleaning To Clean and Sanitize Motor Base 1) UNPLUG POWER CORD. Wipe down exterior surfaces of motor base with soft cloths or sponges dampened with washing solution (for your safety, use water no hotter than 115ºF), rinse water, and sanitizing solution. Prevent liquid from running into motor base by wringing all excess moisture from cloths or sponges before using them.
This warranty does not: a) apply to any unit which has become worn, defective, damaged or broken due to use, repairs, or servicing by other than the Waring Service Center or an Authorized Service Center or due to abuse, misuse, overloading or tampering: b) cover incidental or consequential damages of any kind.
Page 8
Waring Commercial 314 Ella T. Grasso Ave. Torrington, CT 06790 IB-3435C Part# 024151 RV01 9903 03WA23086...