Cleaning The Paper Feed Rollers - Brother DCP-J100 User Manual

Cleaning the paper feed
rollers
If the paper feed rollers are stained with ink, it
may cause paper feed problems.
a
Unplug the machine from the AC power
outlet. Pull the paper tray (1) completely
out of the machine.
NOTE
If the paper support flap is open, close it,
and then close the paper support.
b
Clean the Paper Feed Rollers (1) with a
soft lint-free cloth moistened with water,
using a side-to-side motion.
After cleaning, wipe the rollers with a
dry, soft lint-free cloth to remove all
moisture.
32
c
Put the paper tray firmly back in the
machine.
A
d
Re-connect the power cord.
NOTE
Do not use the machine again until the
rollers are dry. Using the machine before
the rollers are dry may cause paper feed
problems.
1
1