Chapter 8: Using Fierybar; Introduction To Fierybar; Status - Xerox Phaser EX7750 Job Management Manual

8

8-1 Introduction to FieryBar

Chapter 8:
Using FieryBar
RIPping area
Click to expand or collapse FieryBar
With the Fiery Advanced Controller Interface (FACI) installed, you can use FieryBar
to view EX7750 status information, start software, set up and restart the EX7750,
delete stored jobs, cancel active jobs, and log off from Windows. While most elements
in FieryBar have counterparts in Command WorkStation, you can view current
functions on FieryBar when Command WorkStation is not running.
FieryBar is available as part of the FACI. For more information, contact your
N :
OTE
authorized service/support technician.
Introduction to FieryBar
FieryBar, located at the top of the monitor screen, includes the following:
RIP status area

Status

FieryBar displays the following status information for the EX7750:
RIPping area Name of the job currently processing
Amount of the job that has processed
RIP status area
Name of the job currently printing
Printing area
Message area Error messages and other EX7750 information
Printing area
Message area
Activity light