Timers - Xerox ColorQube 9301 Administration And Accounting

Device Settings
• Auto Selection enables the device to choose the best media for the job. This setting also enables
the device to automatically switch from one tray to another when a tray runs out of paper and
another tray is available with the same media loaded. Select Enable or Disable and select Save.
• Repeat the process for each of the trays as required.
Tray Contents
Use to specify the size, type and color of
the media in a tray that has been
designated as a dedicated tray.
• Select a tray designated as a
dedicated tray.
• Change Size is used to select the size
required for the tray. Select the size of
media loaded in the tray and select
Save.
• Change Description is used to specify
the paper type and color. It is
important this setting matches the paper type and color loaded in the device. Select the
appropriate Paper Type and Color setting and select Save.
• Repeat the process for each of the trays as required.

Timers

Select the Timers option to access the
following settings:
• Auto Resume Timer
• Held Job Timeout
• System Timeout on page 277
276 ColorQube™ 9301/9302/9303
Administration and Accounting
on page 277
on page 277