Radio Operations - Clarion NX409 Owner's Manual & Installation Manual

Radio Op_e_ra_t_io_n_s _
Listening to the Radio
1. Touch the
Tuner
button on the Main menu
display. The tuner mode screen is displayed.
2. Press the
[BAND]
button or touch the
[Band]
key on remote control to select the radio
band. Each time the button is pressed, the
radio reception band changes in the following
order: FM1 FM2 FM3 AM FM1 ...
Seek Tuning
1. Press the [BAND] button to select the radio
band (FM or AM).
2. Touch the [..... ] or
[~]
key to automatically
seek a station.
• When touching the
[~]
key, the station is
sought in the direction of higher frequencies.
·When touching the [..... ] key, the station is
sought in the direction of lower frequencies.
Manual Tuning
1. Press the
[BAND]
button to select the radio
band (FM or AM).
2. Touch the [ ... ] or [
~
] key to automatically
seek a station.
• When touching the [
~
] key, the station is
sought in the direction of higher frequencies.
• When touching the [ ... ] key, the station is
sought in the direction of lower frequencies.
Recalling
a
preset station
There are 2 ways to recall the preset station.
• Using the remote control:
1. Press the
[BAND]
button to select the
desire band (FM or AM) on the remote
control.
2. Press the preset number (1 to 6) on
numeric pad.
NX409/NZ409
1. Tuner display
12. Tune Up
2. Sianal intensitv
13. Seek Un
3. Time display 14. Band button
4. Return to previous 15. AS button
screen 16. PS button
5. Band display 17. LOC/DX Button
6.
Loc/DX display 18. Slide Bar (Use it
7. Stereo/Mono to hide some
signal mode function buttons)
8. Preset list 19. Previous page
9. Seek down
button
10. Tune down 20. Next page button
11. Scan button
21.
EO
mode button
• Using the tuner unit:
1. Press the [BAND] button to select the
desire band (FM or AM) on the tuner.
2. Press the preset station (1 to 5) on tuner
display.
3. Press
[X]
or
[I]
to select next station up
or down the preset list.
4.
Press
[AS]
button to auto search the preset
stations.
Auto Store
The Auto Store is a function for storing up to 12
stations that are automatically tuned in
sequentially. If 12 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.
1. Touch the
[Band]
key to select the desired
band. (FM or AM)
2. Touch the
[AS]
key momentarily to start
the Auto Store function.
A beep sounds and the stations with good
reception are stored automatically to the
preset channels.
21